Setting up the display

First-time IT setup for a Lightbox kiosk: the settings passcode, the Lumirai Link display account, and room placement.

This page is for IT. Providers and staff don’t open Settings during a visit.

Lightbox has no staff login. The kiosk signs in to Lumirai Link with a display account, and a local settings passcode keeps configuration in IT’s hands.

Open Settings

  1. On the status bar, right-click the lock icon.
  2. The first time, Lightbox shows Initial Setup. Later visits show Settings Locked.
Left-clicking the lock icon locks the view, or unlocks it in demo mode. It does not open Settings.

Create the settings passcode (first time)

  1. Right-click the lock icon.
  2. Under Initial Setup, enter a Passcode and the same value in Verify.
  3. The passcode must be at least 5 characters.
  4. Choose Save.

If the two values don’t match, Lightbox shows Codes do not match. If the passcode is too short, it shows Code must be at least 5 characters. Keep the passcode with your IT records — clinical staff should never need it.

Unlock Settings later

  1. Right-click the lock icon.
  2. Enter the settings passcode.
  3. Choose Unlock.

Incorrect code. Please try again. means the passcode didn’t match. Choose Cancel to return to the display.

Enter the display account your clinic uses for this kiosk:

FieldWhat to enter
HostnameLink server hostname, plus the port if your clinic uses one
TLSOn for a secure connection; off only if IT requires it
UsernameDisplay username for this kiosk
PasswordDisplay password

The form shows a preview of the connection URL as you type. These are not a provider’s Joints credentials.

Placement

FieldWhat to enter
Location IDClinic location for this room
Room IDThe exam room this kiosk belongs to
Room name override (optional)Label on the status bar, if you don’t want the name from Link
Demo modeUnlock by tapping the lock icon, without a card

Location ID and Room ID must match a Lightbox room in Lumirai Link. If they don’t, see Connecting to Link.

Leave Demo mode off in a live exam room. Use it only for setup, training, or a room without a card reader.

Save and confirm

  1. Choose Save.
  2. Watch the status bar. You want Connected and authenticated.
  3. If you see Not configured, Room not found, or Not a Lightbox room, see Connecting to Link and Troubleshooting.

On a kiosk without a keyboard, use the device keyboard button in Settings.